The Victron Energy Description:
The 50A Buck-Boost DC-DC Converter is a DC-DC converter for charging a 12/24V service battery in vehicles with an intelligent dynamo. Since, when the engine is running, these dynamos (powered by the on-board electronics of Euro 5 and 6 engines) do not always emit the correct charging current, a DC-DC converter is essential for charging the service battery properly.
DC-DC Converter for charging a 12V or 24V service battery in vehicles with a smart alternator (regenerative braking, Euro 5 and Euro 6 engines)
The Buck-Boost DC-DC Converter is a DC-DC Converter for charging a 12V or 24V service battery in vehicles with a smart alternator. The converter will charge the auxiliary battery with a pre-set charge voltage, eliminating high voltages (e.g. Mercedes: 15,4V) and low voltages.
'Engine running' detection system
Deep discharge of the vehicle’s starting battery is avoided by a built-in 'engine running' detection system.
Instead of this detection system, the converter can also be activated by means of a programmable input (D+, CAN bus or (+)15 connection).
Fully programmable
The converter can be fully programmed by means of a simple and user-friendly PC application. (USB type A male to USB type B male cable needed)
One product for 12V, 24V and 12/24V systems
The converter can be programmed to charge a 12V or a 24V auxiliary battery from either a 12V or a 24V alternator and starter battery.
Charge current and input current limiter
The output current is determined by the following factors:
Specification | |
Brand | Victron Energy |
Part No | ORI303050000 |
Input Voltage Range | 10-30V |
Maximum Input Voltage | 30V |
Maximum Charge Current | 12V : 50A or 24V : 25A |
Output Voltage Range | 10-30V |
Under Voltage Threshold | 10 V |
Weight (kg) | 1.1 |
Dimensions | L213 x W120 x H30mm |
Warranty | 5 Years |
Country of Manufacture | Netherlands |