Victron Energy BatteryProtect 12/24V 65A

0 reviews|Write a review

Brand: Victron Energy
Estimated Delivery 5 - 10 Working Days
Product Code: BPR000065400
Reward Points: 40

Price: £39.63
Price in reward points: 3996

Qty: - OR - Add to Build List
Add to Compare

Description Specification Datasheet Reviews (0)

The Victron Energy Description:

The BatteryProtect disconnects the battery from non essential loads before it is completely discharged (which would damage the battery) or before it has insufficient power left to crank the engine.

The BatteryProtect is not designed for reverse currents from charging sources.

Technical Features

12/24V auto ranging

The BatteryProtect automatically detects system voltage.

Programming made easy

The BatteryProtect can be set to engage / disengage at several different voltages.

The seven segment display will indicate which setting has been chosen.

A special setting for Li-ion batteries

In this mode the BatteryProtect can be controlled by the VE.Bus BMS.

Ultra low current consumption

This is important in case of Li-ion batteries, especially after low voltage shutdown. Please see our Li-ion battery datasheet and the VE.Bus BMS manual for more information.

Over voltage protection

To prevent damage to sensitive loads due to over voltage, the load is disconnected whenever the DC voltage exceeds 16V respectively 32V.

Ignition proof

No relays but MOSFET switches, and therefore no sparks.

Delayed alarm output

The alarm output is activated if the battery voltage drops below the preset disconnect level during more than 12 seconds. Starting the engine will therefore not activate the alarm. The alarm output is a short circuit proof open collector output to the negative (minus) rail, max. current 50 mA. The alarm output is typically used to activate a buzzer, LED or relay.

Delayed load disconnect and delayed reconnect

The load will be disconnected 90 seconds after the alarm has been activated. If the battery voltage increases again to the connect threshold within this time period (after the engine has been started for example), the load will not be disconnected.

The load will be reconnected 30 seconds after the battery voltage has increased to more than the preset reconnect voltage.

Specification
Brand	Victron Energy
Part No	BPR000065400
Voltage (V)	12v or 24v
Connection	M6
Maximum Continuous Load Current	65A
Peak Current (During 30 Seconds)	250A
Weight (kg)	0.2
Dimensions	L106 x W48 x H40mm
IP Rating	Electronics: IP67 (potted) Connections: IP00
Warranty	5 Years
Country of Manufacture	India